Press Releases

Product Releases

Published Articles

Awards

	(Los Angeles, CA - Aug 7, 2008) The Blue Box™ LT Provides Cost Effective Solutions for Small to Medium Sized Projects The Blue Box™ LT Relay Panel is a simple alternative to traditional time clocks, twist timers, and contactor packages. It’s available in three sizes, ideal for small or medium projects with 2 to 16 relays, each with a compact footprint. Pre-assembled and ready for installation, the master Blue Box™ LT may be networked with up to 16 digital devices including slave relay panels, switches and photocells, and has an input for an outdoor photosensor programmable to control any relay on the bus. [ Press Release ]
	(Los Angeles, CA – May 8, 2008) DMX512(a) Relay Offers Manual Override Flexibility for Relays, Zones or Panels The DMX 512(a) Relay Panel is a DMX-only relay panel which employs a DMX 512 command to turn on and off SnapLink™ relays. Features include manual override of individual relays, zones or entire panel signal or auto-hand switch. Panels may be controlled in “discrete mode” or “zone mode,” which allows multiple relays to reside on the same DMX address. [ Press Release ]
	(Los Angeles, CA – May 8, 2008) Dual Voltage Switch Allows Control of Loads Operating at Two Different Voltages The Dual Voltage Switch is a normally open electrically held relay which allows a single-pole switch to control loads operating at two different voltages (i.e., 120V or 277V). The Dual Voltage Switch is shipped in a two-gang junction box with a voltage-separating barrier and is shipped with a plaster ring. Its compact size allows a wall switch to be mounted directly onto the GR 2001 box and plaster ring package. [ Press Release ]
	(Los Angeles, CA – May 8, 2008) Emergency Shunt Relay Features Manual Control of Both Normal and Emergency Lighting The Emergency Shunt Relay™ (GR 2001 E/S) is ideal for applications in which loads fed by an emergency source, downstream of an automatic transfer switch, are to be dimmed or switched. The Emergency Shunt Relay will, upon the loss of normal power, shunt lights to full bright automatically, regardless of the position ("on", "dimmed" or "off") of the wall switch or dimmer. [ Press Release ]
	(Los Angeles, CA – May 1, 2008) Wireless Switch & Receiver Offers Total Control of Lighting System The Wireless Switch & Receiver, from Lighting Control & Design (LC&D), offers total control of the system. The Wireless Switch & Receiver, which require no batteries or maintenance, can be stuck or screwed onto a flat surface for instant control of an LC&D system. Every transmitter is manufactured with a unique 32-bit address allowing multiple wireless switches. [ Press Release ]
	(Los Angeles, CA – April 1, 2008) MicroPhase™ Dims Standard and Low-Voltage Incandescent, Quartz, Neon and Cold-Cathode Sources The MicroPhase™ is an extension of the MicroPanel iDim. The compact, self-contained enclosure utilizes a single module for phase dimming of (1) 20 amp (2) 10 amp loads. Each module includes a backbox, heatsink, temperature sensor, a rugged 40 amp SSR package, toroidal filter and control electronics. The MicroPhase™ wall-mount dimmer is engineered with the same quality standards demanded in performance industry dimming systems. [ Press Release ]
	(Los Angeles, CA – March 25, 2008) SlimLine™ Photosensor Provides Alternative Mounting for Applications with Indirect Lighting The SlimLine™ Photosensor is the solution for daylight harvesting applications with indirect lighting. Indirect luminaries throw light onto the ceiling where the photosensor is traditionally mounted and in order to operate successfully, a photosensor can not “look” directly at electric lighting. The SlimLine™, is mounted on the bottom of an indirect luminaire, thus allowing it to “look” below the luminaire and get the proper light reading. [ Press Release ]
	(Los Angeles, CA – February 20, 2008) LC&D Offers Same-Day Shipping and Pick-Up for The Blue Box™ The Blue Box™, from Lighting Control & Design, is now available for same-day shipping and pickup and is available to be shipped directly to your site (USA only), pre-wired, UL listed and ready to install the same day as the order. In Southern California, The Blue Box™ is also available for same-day factory will call pick-up if the order is received by LC&D before noon PST that day. [ Press Release ]