DataLogger™ lighting management software reads and then logs information about the lighting controls which can be used to better manage a facility. DataLogger offers three different software modules:

Runtime Module keeps a log of the total run time of lighting loads. This can be used to schedule lamp changes and to keep track of lamp life (in hours).

The ON event total counts the number of ON events for each relay. This is useful for lamp life calculations.

Event Logging Module keeps a log of all events which affect the status of relays, dimmers,SmartBreakers, and other digital devices. For example: the actual on and off times of relays, which device or schedule turned a relay or group of relays on/off or how often lighting is extended after hours.

The GR 2400 Digital Bus writes the logs directly to the UpLink™ network multiplex card for each GR 2400 Digital Bus. Logs can be downloaded and managed from a workstation which has installed DataLogger. A MetaServer™ digital web server acts as the portal to the UpLink Cards and can be accessed through the local area network or over the Internet.

Refer to the UpLink and MetaServer Tech Sheets for more information about these products.